The DVP camera module is one of the FPC strip camera modules. DVP camera module, using DVP interface, DVP is parallel port transmission, slow speed, low transmission bandwidth.
The PCLK limit of DVP bus is about 96M, and the cable length should not be too long. The maximum speed of all DVPS should be controlled below 72M, and PCB layout is easy to draw. The DVP is parallel and requires PCLK, VSYNC, HSYNC, D[0:11]. The data can be 8/10/12bit, depending on whether the ISP or baseband supports it.
MIPI is LVDS low-voltage differential serial port, only needs CLKP/N, DATAP/N，maximum supports 4-lane, generally 2-lane can be done. The MIPI interface has fewer signal lines than the DVP interface. Because it is a low-voltage differential signal, the interference is small and the anti-interference ability is strong. The DVP interface is limited in terms of signal integrity, as well as speed. 500W can barely use DVP, 800W and above all use MIPI interface.
